Getting started
SQT0993
13
• When you do not want the audio to be output from the TV,
set “HDMI Audio Output” to “Off” (> 61).
When this unit is connected to the network, you
can enjoy network functions (DLNA function,
Network Service, TV Anywhere, etc.).
For details about connection method, refer to the
instructions supplied with the connected
equipment.
After you make the LAN cable/Wireless LAN
connection, the network setting is needed.
(> 16, Easy Network Setting)
• Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
About wireless LAN connection (> 16, Easy
Network Setting)
• For up-to-date compatibility information on your Wireless
router, refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
• The unit is not compatible with public wireless LAN
services.
Amplifier/receiver connections
HDMI terminal
• You will not be able to view 3D programmes or 4K images
with this connection if your amplifier/receiver is not 3D or
4K compatible.
[HWT 250]
DIGITAL AUDIO OUT terminal
HDMI cable
HDMI cable
(supplied)
Amplifier/
receiver
Amplifier/receiver
Coaxial cable
Network connection
LAN cable connection
Wireless LAN connection
Broadband
router, etc.
Internet
LAN (ethernet) cable
DMR-HWT250_150EB_eng.book 13 ページ ２０１５年９月１４日 月曜日 午後１時５０分
To Next Page
Loading...
