Getting started
VQT4L30
14
Connection
3D programmes can be played back when this unit is connected to a 3D compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
To connect and register the USB HDD (optional)
Refer to “Registering the external HDD (USB HDD)”. (> 63)
[PW T635] To connect the Communication Camera (optional)
Refer to “Enjoying Network Service”. (> 61)
[PW T530] To connect the Wireless LAN Adaptor (optional)
Refer to “Network connection”. (> 17)
About HDMI cable
Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable.
When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
Basic connections
HDMI
VHF/UHF
RF IN
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
Cooling fan
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
To the aerial
Aerial cable
RF coaxial cable
(supplied)
TV’s rear panel
DMR-PWT635EB_eng.book 14 ページ ２０１４年１月２８日 火曜日 午後５時４６分
To Next Page
Loading...
