EasyManua.ls Logo

Panasonic DMR-UBC90 - Using the External HDD (USB HDD)

Panasonic DMR-UBC90
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Recording
TQBS0033
46
Using the external
HDD (USB HDD)
§
“For recorded programmes (> 27)” only
If you intend to move recorded programmes to a
USB HDD, the USB HDD must be registered to
this unit first.
Limitation information
Registering of a USB HDD will format the
USB HDD and all the content already recorded
will be deleted.
Up to eight USB HDDs can be registered on this
unit. If you have already registered eight
USB HDDs, it will be necessary to delete one or
more of them before registering a new
USB HDD.
Registered USB HDDs cannot be used with
devices other than this unit.
Certain non-confirmed USB HDDs cannot be
used with this unit.
If a problem occurs with the USB HDD, please
contact the manufacturer of the device.
Connect this unit with optional USB HDD.
Only one USB HDD (For recorded
programmes, > 27) can be connected.
The USB HDD can be connected to the USB
port on the rear of this unit.
If the registering screen appears when
connecting the USB HDD, go to step 5.
1 Press [FUNCTION MENU].
2 Select Basic Settings” in “Setup”, then press
[OK].
3 Select “Settings for USB HDD” in “HDD /
Disc / USB HDD”, then press [OK].
4 Select “USB HDD Registration”, then press
[OK].
6 When the registering is complete, message
screen appears.
Press [OK].
7 The confirmation screen appears.
Press [OK].
To cancel all USB HDD registrations (> 94)
It is not possible to play back the content on the USB HDD
whose registration has been cancelled.
You can check the registration number of the USB HDD on
the Video Menu. (> 47)
Disconnecting without following this procedure
may result in the loss of recorded content from
the USB HDD or the internal HDD.
1 Press [FUNCTION MENU].
2 Select Basic Settings” in “Setup”, then press
[OK].
3 Select “Settings for USB HDD” in “HDD /
Disc / USB HDD”, then press [OK].
4 Select “USB HDD Disconnection”, then
press [OK].
5 Select “Yes”, then press [OK].
6 Disconnect the USB HDD from this unit.
Regarding the external HDD (USB HDD)
Connecting the USB HDD
§
This unit’s rear panel
e.g., [UBC90]
USB HDD
Registering the USB HDD
5 Select “Yes”, then press [OK].
Disconnecting the USB HDD
DMR-UBC&UBS90EG_eng.book 46 ージ 017年3月2日 木曜日 午後7時6分

Related product manuals