16
5. Press [OK] and then following "Diagnosis Code" will be displayed.
Release from self Diagnosis mode:
1. Press the [POWER] button on the main Unit.
3.5.1.2. Description of the self diagnosis code
self diagnosis code details:
* If the power does not turn on or CPU does not work properly, self diagnosis will not run.
In that case, check the power supply or P.C.B. connection.
Item Details
Model Name Display the model name
Software version Display the software version
Wireless LAN module Display the wireless LAN module version
(Built-in wireless LAN model)
Wireless LAN adapter Display the wireless LAN adaptor module version
(Wireless LAN adaptor applicable model)
(No display) Wireless LAN unsupported model
Device ID Display the device ID
Diagnosis code Display the diagnosis code
Diagnosis details Diagnosis details
Drive HDMI terminal 2 (DMR-UBS90EG)
HDD Reserved ("0" displays always)
Reserved ("0" displays always) Reserved ("0" displays always)
USB-HDD diagnosis Reserved ("0" displays always)
Digital P.C.B. (CPU/Flash/DDR/HDMI etc.) Failure history of Drive/HDD/FAN
TUNER system Reserved ("0" displays always)
Reserved ("0" displays always) Reserved ("0" displays always)
Main P.C.B. (EEPROM) Reserved ("0" displays always)
To Next Page
Loading...
