Panasonic DMR-UBS80EG - Page 47

47
Switch the TV system Switch the TV system to another one. 1.
2.
1. While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "05 P/N" is displayed on
the unit's display.
3. Press [OK] on the remote control.
Deep Colour initialization The Deep Colour setting is initialized. 1.
2.
1. While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "07 DC" is displayed on the
unit's display.
3. Press [OK] on the remote control.
Set 4k/60p output to
"OFF"
Set 4k/60p output to "OFF", and set the
output to HDMI (ver. 1.4) equivalent.
1.
2.
1. While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "13 L4K" is displayed on
the unit's display.
3. Press [OK] on the remote control.
Item FL display Key operation
Mode name Description Front Key