56
6. Disc Maker ID is displayed for 5
seconds.
7. Factor of Drive Error (hexadecimal)
occurring is left displayed.
**: Error occurring operation code
(This is not used)
++: Error occurring disc type
: Error occurring disc situation
8. When the last error does not exist.
In case that the maker cannot be
identified, display is black out.
Play BER confirmation Measures play BER of DVD-RAM, BD-RE
DL (Ver2.0) media and displays the
measurement result.
Measuring start.
(Measuring in process)
The measuring result.
When an error occurs while
measuring.
When DVD-RAM or BD-RE DL
(Ver2.0) is not inserted.
1. Insert DVD-RAM or BD-RE
DL (Ver2.0) disc into BD
Drive in service mode.
2. Press [4] [3].
Item FL display Key operation
Mode name Description (Remote control key)
To Next Page
Loading...
