Panasonic DMR-UBS80EG - Page 58

58
Factory default value Displays values set at the factory. Factory default value. Press [6] [2] in service mode.
Test progress
management value
Displays AV scan result. When AV scan result is present
Number of values less than -10 ms
Number of values less than -20 ms
Number of values less than -30 ms
Number of values less than -40 ms
Number of values less than -50 ms
Number of values less than -60 ms
Number of values less than -70 ms
Number of values less than -80 ms
Number of values less than -90 ms
Number of values less than -100 (or
150) ms
Number of values less than -100 (or
150) to 270 ms
Number of Seek error's
Press [6] [3] in service mode.
Item FL display Key operation
Mode name Description (Remote control key)