68
9.1.3. Top Case
1. Remove 3 Screws (A).
2. Slide the Top Ornament rearward and unlock 2 Locking
Tabs (A), 1 Locking Tab (B) and 9 Locking Tabs (C).
3. Remove the Top Ornament in the direction of the arrow.
4. Remove 2 Screws (B) and 2 Screws (C).
5. Slide the Top Case rearward and open the both ends at
rear side of the Top Case a little and lift the Top Case in
the direction of the arrows.
Notes: (When attaching the Top Ornament and replacing
the Top Case)
• Pushing the Top Ornament in the arrow direction, and push
the hole of Top Case to the tabs of Top Ornament.
• For how to attach the Absorbing sheet, see below.
To Next Page
Loading...
