- 29 -
Reference
Reference
Setup menu
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
1 Press [HOME].
2 Select “Setup”.
3 Select “Player Settings”.
4 Select an item and change the settings.
To exit the screen
Press [HOME].
∫ Resolution
The items supported by the connected devices
are indicated on the screen as “¢”. When any
item without “¢” is selected, the images may be
distorted.
≥ If “Auto”*
1
is selected, the best suited output
resolution to the connected TV is automatically
selected.
∫ 4K60p Output
This unit automatically chooses to output images
in 4K*
2
60p when connected to a 4K/60p
compatible TV.
≥ This item is available only when “Resolution” is
set to “Auto” and “4K”.
≥ This item is not available when “HDMI(AUDIO)
Output Mode” is set to “Video+Audio”.
≥ To c onn e c t t o a T V t h a t su ppo r ts 4 K/ 6 0p ( 4 : 4 :4 /
8bit) or 4K/60p (4:2:2/12bit), select “4K/
60p(4:4:4)”.
Images will not be output correctly with an
HDMI cable that does not support 18 Gbps.
≥ To c onn e c t t o a T V t h a t su ppo r ts 4 K/ 6 0p ( 4 : 2 :0 /
8bit), select “4K/60p(4:2:0)”.
∫ 24p Output
Content recorded at 24p*
3
, such as BD-Video
films, is output at 24p when played back.
≥ When this unit is connected to TV compatible
with 4K/24p and “Resolution” is set to “Auto” or
“4K”, images will be output in 4K/24p.
≥ When this unit is connected to a TV compatible
with 1080/24p and “Resolution” is set to “Auto”,
“1080i” or “1080p”, images will be output in
1080/24p.
≥ If images output in 24p are distorted, change
the setting to “Off”.
∫ HDMI(VIDEO) Output Mode
Set whether or not to output audio from the HDMI
VIDEO OUT terminal.
≥ When an amplifier is connected to the HDMI
AUDIO OUT terminal and this menu item is set
to “Auto ( Video Only / Video+Audio )”, the TV
may not output audio. In that case, select
“Video+Audio”.
∫ HDMI(AUDIO) Output Mode
Set whether or not to output images from the
HDMI AUDIO OUT terminal.
≥ It is not possible to output 3D, 4K or HDR
content from the HDMI AUDIO OUT/HDMI
VIDEO OUT terminal when “Video+Audio” is
selected.
∫ HDR10+ Setting
You can set ena ble /disable of the HDR10+
function.
By changing this setting to “On”, you can use the
HDR10+ function under the following conditions:
–A device that supports HDR10+ is connected
(> 10).
–A disc that supports HDR10+ is played back.
≥ The “Optimum HDR Adjustment” setting is
disabled while using the HDR10+ function.
(> 27)
HDMI
To Next Page
Loading...
