Getting started
- 8 -
Control reference guide
∫ Remote control
When other Panasonic devices respond to the
remote control of the unit, change the remote
control code. (> 35)
∫ Reprogramming the remote
control
You can operate the TV us ing the unit’s remote
control.
1 Input the 2-digit code (> 44) while
pressing [Í] of TV operation button on the
remote control.
e.g., 01: [0] B [1]
2 Test by turning on the television.
≥ If your television brand has more than one code listed,
select the one that allows correct operation.
1Turn the unit on and off
2TV operation buttons
You can operate the TV through the unit’s
remote control. Some buttons may not work
depending on the TV.
3Select title numbers, etc./Enter numbers or
characters
4Cancel
Clear the currently selected character.
(when entering a password for “Ratings” in
the Setup menu, for example)
5Basic playback control buttons (> 19)
6Show Pop-up menu (> 20)
7Show Top menu (> 20)
8Show Option menu (> 26)
9Colored buttons (red, green, yellow, blue)
Used for various purposes depending on the
screen
10 Transmit the remote control signal
11 Open or close the disc tray (> 9)
12 Show Closed Caption setup screen (> 26)
13 Change soundtrack (> 20)
14 Show the status messages (> 20)
15 Show “Playback Information Window” (> 20)
16 Show the Home screen of the Network
Service (> 22)
17 Show “HDR Setting” (> 20)
18 Show NETFLIX screen (> 22)
19 Show HOME menu (> 19)
20 [3, 4, 2, 1] : Move the highlight for
selection
[OK] : Confirm the selection
(2;)(;1) : Frame-by-frame (> 20)
21 Return to previous screen
To Next Page
Loading...
