Panasonic DP-UB820EB-K - Unit Interface: Front and Rear Panels

Getting started
- 9 -
∫ Front
1Disc tray
2Display
3USB port( DC 5V500mA)
This port supports USB 2.0 High Speed.
4Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right
5Open or close the disc tray
6 Standby/on switch (Í/I) (> 17)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
∫ Rear
1AC IN() terminal (> 10)
2Cooling fan
3HDMI AUDIO OUT terminal (> 11)
4HDMI VIDEO OUT terminal (> 10)
5LAN port (> 16)
6Analog AUDIO OUT terminals (> 12)
7 DIGITAL AUDIO OUT terminal
(OPTICAL terminal) (> 12)
8 USB port (HDD) ( DC 5 V 900 mA)
This port supports USB 3.0 Super-Speed.
92ch AUDIO OUT terminals (> 12)
10 7.1ch AUDIO OUT terminals (> 12)
5
6
1
2 3 4
Pull to flip down
the front panel.
CAUTION
Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and
this may cause malfunction.

≥ When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.
≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the connected equipment.
21 3 4 5 6 7
8910
Class II equipment (The construction of the product is
double-insulated.)
Value Electronics
Factory Direct Authorized Dealer
www.ValueElectronics.com