180
150
170
190
200 °C Wavy Less damaged
190 °C
180 °C Your hair type
Your hair condition
170 °C
150 °C
Straight Damaged
• The temperature is raised using “+” and lowered using “–”
of the Temperature Level Adjustment Switches (F).
• Confirm that the LED Temperature Level Display (C)
has changed.
• When the selected LED Temperature Level Display (C)
stops blinking (and glows), the straightener has reached
the selected temperature.
(Note that the time taken to reach operating temperature
may vary depending on the operating environment.)
►Notes
• When you use the straightener for the first time, be sure
to set the temperature to 300/150*.
• The temperature 395/200* is high and may damage
your hair.
We recommend that you avoid continuous lengthy use
of this level, and only use it if your hair is in a suitable
condition.
• After switching on, the straightener reaches operating
temperature (approximately 212 °F/100 °C*) after about
30 seconds.
* According to the country, the value of temperature
differs between Fahrenheit and Celsius.
To Next Page
