16
English
About nanoe™
What is nanoe™?
(nanoe™ generation method: High-voltage discharge)
nanoe™ is charged fine water particles, generated by applying
high voltage in order to split water. Its diameter is smaller than
1/100 of steam (approx. 6000–8000 nm), and it cannot be
seen with the naked eye. Since nanoe™ is generated by
collecting water in the air, it may be difficult to generate in
certain cases depending on the environment.
How nanoe™ works
Generally hair has properties which make it easy to become
positively charged with electricity. These properties attract
strongly negatively charged nanoe™ which penetrates the hair
with moisture. Furthermore, they make the hair slightly acidic,
tighten cuticles and keep your hair strong, elastic and healthy.
►Notes
● You may notice a characteristic odor when using this
appliance. This is caused by the ozone it generates and is
not harmful to the human body.
● Drops of water may blow out of the nanoe™ Outlet during
use, but this is not a malfunction.
● A humming noise may come out of the nanoe™ Outlet, but
this is the sound of nanoe™ being discharged and is not a
malfunction.
Cleaning
Clean the straightener after it has cooled and with the plug
removed from the household outlet.
Cleaning the nanoe™ Outlet (H)
● Clean the nanoe™ Outlet about once per month.
● This maintenance allows the straightener to sustain the
generated level of nanoe™ over a long period.
1
1
Shut the Iron Plate (G) with the Open/Close
Lock (D).
2
2
Damp the end of the Cleaning Brush (L)
(included) with store-bought purified water or
tap water.
3
3
Deeply insert the
Cleaning Brush (L)
(included) into the
nanoe
TM
Outlet (H).
Brush three flat portion
(
a
) and pin-shaped
portion (
b
) by moving
the Cleaning Brush (L)
(included) right and left
for about ten times.
(nanoe
TM
Outlets are
located on both sides.)
b
a
(On both sides)
• Instead of using the Cleaning Brush, thin cotton swabs
(for babies) can also be used.
To Next Page
