14
English
Using the straightener
Before use, confirm that the LED Temperature Level Display
(C) has stopped blinking and glows.
Straightening
1
1
Hold a bundle of hair with a width of
approximately 1-31/32″ (5 cm).
• Do not take too much hair as it may be difficult to
straighten your hair.
2
2
Clamp the bundle of hair in
the center of the Iron Plate
(G).
• Use both hands and hold both
Press Plate Tips (A) to straighten
curly hair.
• Do not use excessive force as it
may place a strain on hair ends.
3
3
With the hair clamped, move
the straightener straight
toward the hair ends.
• Move the straightener slowly (at a
speed slower than ordinary
brushing).
• Repeat in turn, starting from the lower portion of your
bundled hair.
• When hair is clamped, do not hold the straightener in
the same position.
4
4
After use, press and hold
the Power Switch (E) for
approximately 1 second to
turn off the straightener.
5
5
Style your hair using hair cream, wax, etc.
►Notes
• Steam will be generated when you apply the
high-temperature Iron Plate (G) to wet hair.
• Avoid using flammable styling products, since they may
generate gases when heated.
• Avoid accidentally touching the Temperature Level
Adjustment Switches (F) and changing the
temperature during use.
After Use
1
1
Remove the plug from the household outlet.
2
2
Shut the Iron Plate (G) with
the Open/Close Lock (D) to
store it.
Lock
To Next Page
