22
Problem Possible cause Action
• While the steam is being produced,
its color gets lighter and it is hard to
see.
• There are hot water droplets flying
out with the steam.
You are using something else mixed in with
the water.
Let the steamer cool down for at least
10 minutes, then clean the inside of
the steamer. (See page 16.)
There is a gurgling sound while the
steam is being is produced.
This is the sound of the water boiling inside
the steamer. It is not a problem.
There is a hissing sound while the
steam is being is produced.
The sound is due to electrical discharge and
is not a problem.
During steam generation, a "pssst"
sound can be heard from the cool mist
outlet.
The sound is due to the air inside the main
unit being exhausted. This is not a problem.
Mist is cut off.
This is due to the air inside the main unit
being exhausted. This is not a problem.
Mist does not come out.
Low water level in the water supply tank. Supply water. (See page 12.)
Scale deposits etc. are attached to the cool
mist outlet.
Clean the cool mist outlet. (See
page 17.)
Operating noise is loud during mist
generation.
A mist generation sound ("shoo") and noise
from the operating pump in the main unit will
be heard but this is not a problem.
The way the mist is emitted fluctuates.
The way the mist is emitted is not constant
and may fluctuate somewhat, but this is not a
problem.
The CHECK lamp glows.
(See page 20.)
The CHECK lamp blinks.
EH-SA97_HK.indb 22 2016/04/06 13:33:39
To Next Page
Loading...
