Panasonic EH-SA97

Operating Instructions
(Household)
Facial Ionic Steamer
Model No.
EH-SA97
English ........................................................3
中文 ...........................................................25
EH-SA97_HK.indb 1 2016/04/06 13:33:36

Panasonic EH-SA97 Specifications

General

Brand	Panasonic
Model	EH-SA97
Category	Kitchen Appliances
Language	English

Summary

Safety Precautions

Explanation of Symbols

Explains warning and caution symbols used in the manual.

WARNING To Prevent Skin or Health Problems

Lists conditions and people who should not use the appliance to prevent health issues.

This Product

Product-specific warnings covering storage, usage with flammables, and handling.

In Case of an Abnormality or Malfunction

Instructions for immediate action in case of appliance malfunction or damage.

Power Cord

Precautions for handling and maintaining the power cord to prevent hazards.

CAUTION

General cautions related to appliance use and power cord handling.

Course Description

[COURSE1] Clear Skin (approx. 13 min. 30 sec.)

Details Course 1 for clear skin, including duration and steam/mist sequence.

[COURSE2] Skin FitnessElasticity (approx. 12 min.)

Details Course 2 for skin fitness and elasticity, including duration.

[COURSE3] Sebum Care (approx. 13 min.)

Details Course 3 for sebum care, including duration.

Before Use

[COURSE4] Soft Skin* (approx. 11 min.)

Details Course 4 for soft and moist skin, including duration.

Heed the Following to Protect Your Skin:

Advice on steam usage frequency and post-care to protect skin.

Please Check

Pre-use checks including nozzle guard, clothing protection, and unit placement.

Preparation

1 Remove the Water Supply Tank from the Main Unit.

2 Fill the Water Supply Tank with Water.

3 Attach the Water Supply Tank to the Main Unit.

Place the Main Unit on a Flat, Level Surface.

5 Insert the Appliance Plug into the Main Unit.

6 Plug in the Power Plug into the Power Outlet.

How to Use the Steamer

1 Open the Lid and Press the Power Switch to Turn on the Appliance.

Steps to open the lid and power on the appliance.

3 Press the SELECT Switch to Select Your Favorite Course.

How to select a desired course using the SELECT switch.

How to Use the Steamer (Continued)

4 Press the STARTSTOP Switch.

How to start the selected course using the START/STOP switch.

5 Direct Steam, Mist and Mild Mist onto Your Face.

Guidance on directing steam/mist onto the face and handling water droplets.

6 Adjust the Angle (UpDown) of the Nozzle.

How to adjust the nozzle angle for optimal steam/mist delivery.

7 Press the Power Switch to Turn Off the Appliance.

How to turn off the appliance after use.

After Use

1 Leave the Appliance Alone to Cool for at Least 10 Minutes.

2 Unplug the Power Plug from the Power Outlet and the Appliance Plug from the Main Unit.

5 Close the Lid and Remove the Water Supply Tank from the Main Unit.

6 Discard the Water in the Tank.

7 Discard the Water in the Main Unit.

8 Attach the Water Supply Tank.

Cleaning

9 Use a Towel, etc., to Wipe Any Water Droplets off the Main Unit, then Store the Main Unit in a Dry Place.

Cleaning Inside the Main Unit

1 Fill the Water Supply Tank with Water Up to FULL Line and Close the Water Supply Cap.

2 Attach the Water Supply Tank to the Main Unit.

3 Shake the Appliance Horizontally 3 to 4 Times.

4 Remove the Water Supply Tank from the Main Unit.

5 Discard the Water from the Water Outlet in the Direction of the Drain Arrow While Pushing the Inclination Switch on the Bottom of the Main Unit.

Cleaning the Cool Mist Outlet

1 Remove the Cap from the Attached Cleaning Needle.

2 Clean the Two Cool Mist Outlets with the Needle.

3 Attach the Cap to the Attached Cleaning Needle.

Problem Notification Function of the Lamps

The CHECK Lamp Glows.

Explains causes and remedies when the CHECK lamp glows.

The CHECK Lamp Blinks.

Explains causes and remedies when the CHECK lamp blinks.

All Lamps Blink.

Explains causes and remedies when all lamps blink simultaneously.

Troubleshooting

The Steamer Does Not Turn On.

Troubleshooting steps for when the steamer fails to power on.

The Power Plug is Abnormally Hot.

Troubleshooting for an abnormally hot power plug.

No Steam is Produced Even About 1 Minute or More After the Power is Turned On.

Troubleshooting for no steam production after startup.

The Steam Has Stopped.

Troubleshooting steps for when steam emission stops.

Troubleshooting (Continued)

All Lamps are Blinking.

Troubleshooting for all lamps blinking, indicating device fault.

Water Leaks from the Water Outlet.

Mist Does Not Come Out.

Troubleshooting for no mist output.

CHECK Lamp Glows.

CHECK Lamp Blinks.