EN13
Check
6
Touch the massage heads with your hands
to make sure that they are retracted.
When the massage heads are not in the retracted position
Press the •
button twice to return the massage
heads to the retracted position.
Check
Lower Back
Cover
7
Check that the fabric of the unit where
the massage heads move has not been
ripped.
Flip the pillow and lower back cover to check the fabric where •
the massage heads are moveable.
Adjust the pillow height
so that the bottom edge
is at ear level.
8
Sit down and adjust the pillow.
Adjust the controller stand.
Adjustable to the right and the left.•
9
Select a massage menu.
(See page EN14.)
10
Adjust the reclining angle as necessary.
English
• Before using the unit, always raise the pillow and lower back
cover to check that there are no rips in the fabric covering the
area where the massage heads move.
To confirm the surface of fabric no damage at the same time.
(No matter how small the rip, stop using the unit immediately,
unplug the power cord, and have the unit repaired.)
Using the unit with a ripped fabric may result in injury or
electric shock.
WARNING
To Next Page
Loading...
