EN20
To Customize
To adjust the upper and lower positions of the massage heads
Press buttons to adjust.
Each press moves the massage heads •
approximately 1.5 cm.
When you hold down the button, the operation •
will continue until you release it.
Flashing indicates the
approximate current position.
To adjust the massage width
Just operates with the “tap” and “back roll” massages.
Press buttons to adjust.
The narrowness or broadness of the width can be adjusted.•
When using the leg/foot (heat/air) massage simultaneously
Press the button.
(See step 2 on page EN21.)
To change the content of the massage
To change from a “MANUAL” operation
Press the button,
and select operations from the types of massage.
(See page EN19.)
To change to “FULL BODY” massage
Press the button, and select a program.
Upper body massage will stop temporarily.
(See page EN15.)
To change to
“SELECTED AREA”
massage
Press the button, and select a program.
Upper body massage will stop temporarily.
(See page EN18.)
Depiction of a massage in progress
Combination of
Tap (Soft) and Back roll (Full)
The currently functioning operation is
displayed.
The width of the massage heads
can be adjusted
English
To Next Page
Loading...
