EP-MA10
ORDER NO. HPD1008U17CE
- 18 -
If you cannot move the Massage mechanism block up and down due to the
malfunction of the Up/down motor, move the Massage mechanism block as
follows:
1. Necessary products Air hose x 1pc (approx. 8cm)
Bit x 1pcs (approx. 8cm) Electric screwdriver x 1pc
Install the air hose on the bit.
2. Place the air hose-covered bit on the Up/down motor
rotation sensor plate, and turn on the electric screwdriver.
Caution
Operate the electric power tool at low speed
* Be careful of the wiring or sharp metal edges.
To Next Page
Loading...
