EP-MA10
ORDER NO. HPD1008U17CE
- 20 -
4.5. Installing the Massage Mechanism Block
1.Pushing the Massage mechanism block down,
turn Up/down sensor plate (counterclockwise
from upward). Move the Massage mechanism
block till it gears with each other.
2.Put the Massage mechanism block and install two
Rail piece sets.
CAUTION
Check if the Massage mechanism block is
horizontally installed by moving the Massage
mechanism block.
* If the Massage mechanism block is not horizontally
installed, it will lead to abnormal sounds or
malfunction
To Next Page
Loading...
