Panasonic EP-MA10 - Error Display; Error Codes and Meanings

EP-MA10
ORDER NO. HPD1008U17CE
- 27 -
4.10.2. Removing the Tapping rotation sensor, Up/down sensor, Intensity sensor, and Tapping motor
1. Disconnect four Connectors (CN5、CN9、CN10、CN11)and cut two Cable ties T30R on the Connecting PCB
.
2.Unscrew one Screw and remove the Intensity sensor
install plate.
3.Unscrew two screws and remove the Up/down tapping
sensor.
4.Disassemble the Up/down tapping sensor, Tapping
rotation sensor, and the Up/down sensor.