GB27
English
2
3
4
1
1
Press the button to turn on the power.
• The power is turned o automatically if 3 minutes or more pass
without operation.
2
Select the part you want to massage
(
).
• The list of body parts that can be selected is
displayed on the left.
(Example) When “NECK” is selected
3
Select the massage action you prefer.
• The ashing frame is the currently
selected operation.
• The massage technique can also be selected
by repeatedly pressing the area selected in
Step 2.
• When
is selected, “ROLL” or a combination of “ROLL” and
another technique can be selected.
4
Press the button to start the massage.
• The massage heads will move to the selected position
automatically to start the massage after the body scanning is
completed.
See page GB21 about body scanning.
• See pages GB28–GB29 for setting the massage in accordance
with your preferences.
• When a massage to the same location has continued for
5 minutes, it will automatically move up approximately 3 cm.
Body scanning for Manual Operation
Neck/Shoulder/Full back
....Normal body scanning.
Middle back/Lower back
.... Simple body scanning. (The massage heads will not come
up to the shoulder position.)
Selection of a massage technique and body region
Manual Operation
See Warning No. 4 on page GB2.
EP-MA70_EN2.indd 27 2011/02/15 17:57:16
To Next Page
Loading...
