6
Switch on the power supply.
1 Insert the power plug into an electrical
outlet.
2 Turn the lock switch key to the “open”
position.
3 Slide the power switch to the “on” position.
Check
Check once a month.
See Warning No. 8 on page 1.
Check that the fabric of the unit where the massage heads
move has not been ripped.
Remove the unit cover.
How to remove the unit cover (See pages 25 and 26.)
•
7
Sit with the back of your head aligned
with the upper part of the backrest.
Only when using the leg/foot massage
8
Take out the leg/foot massage section
and put your feet on it.
1 Pull straight up on the leg/foot massage
lock release band.
The leg/foot massage section will extend forwards a
small amount.
2 Put your feet on the sole section.
3 Push your feet forward until it locks with a
“click”.
(Angle of the sole section or the calf section will not
bexed.)
To Next Page
Loading...
