Press the button to enter the program
selection mode for Pre-Programs.
(The power will turn off automatically if no operation is performed within
3 minutes after entering the program selection mode.)
1
Press or to select a program.
Select one of “DEEP”, “QUICK (8 min.)”, “RELAX” and “REFRESH”.
The mark for the currently selected
program will flash.
2
Select a program and press the button.
1 Put your head on the backrest.
Massage Head
The massage heads will
move slowly upwards with
the unit emitting a beeping
sound.
2 When the massage heads reach the top, an operation to
determine your approximate shoulder position will begin.
[Shoulder checking operation]
Massage Head
The massage heads slowly
lower while performing a
tapping action. (The frame
of
flashes.)
For some sitting positions,
the massages heads may
temporarily reach a
position near the lower
back.
•
USING PRE-PROGRAMS
Pre-Programs characteristics
DEEP
Uses Knead, Soft Shiatsu
and Tap actions to loosen up
the muscles from neck to
lower back.
Recommended for those
with severe stiffness or
who prefer a stimulating
massage.
QUICK (8 min.)
Based on the DEEP
program, this program
concentrates on the areas
which tire easily and is short
at 8 minutes.
Recommended for those
who want a spare-time
massage.
RELAX
Uses less stimulating actions
to relax your body.
Recommended for those
who want to relax with a
gentle massage.
REFRESH
Lowers the massage
intensity gradually and then
raise it to achieve
refreshment.
Recommended for
switching mood.
[Program Selection Mode]
To Next Page
Loading...
