CLEANING AND MAINTENANCE
See Danger No. 2 on page 1.
Seat Fabric, Plastic Area
Routine cleaning and maintenance
Wipe off dust and mild dirt with a soft dry cloth.
When dirty
1 Soak a soft cloth in water or a mild detergent diluted to 3 – 5 %
with warm water, and wring out thoroughly.
2 Wipe the surface.
(Wipe the fabric parts with a patting motion.)
3 Wipeoffthecleaninguidwithaclothmoistenedwithwater
only and thoroughly wrung out.
4 Wipe with a dry, soft cloth.
5 Allow the unit to dry naturally.
(Do not rapidly dry using dryers, etc.)
When the dirt is not easily removed
Try the following methods during Step 1.
<For fabric>
Brush with water or a mild detergent.
(Be careful not to brush the fabric too much as it will cause damage.)
Disconnecting the power
See Warning No. 1 and 6 on page 1, and No. 10 on page 2.
1
Slide the power switch to the “off” position.
2
Turn the lock switch key to the “lock”
position.