- It would be easy to remove the Air unit if you set the Massage balls at
widest and strongest.
10.13.9. Removing the Shoulder holding Air bags
1. Remove the Massage mechanism block from the Rear frame.
2. Unscrew two Hex screws of the Air bags.
3. Take off the Snap pins of the Air bags.
4. Move the Hose clamps, and remove the Air bags from the hoses.
Caution when installing
- Be careful of the installation directions of the Hose clamps and the Snap
pins.
Caution when removing
- It would be easy to remove the Air bags if you set the Massage balls at
widest and strongest.
86
To Next Page
Loading...
