Removing and mounting the comb attachments
Mounting the comb attachment
Mount the comb attachment to the main body until
it clicks.
• If the comb attachment is not attached correctly, it
may shift and end up cutting too much during use.
Removing the comb attachment
Hold the main body securely and remove the comb
attachment from the main body.
How to adjust the trimming height
• Make sure that the clipper is turned off.
Turn the dial and adjust the trimming height
indication mark (a) to the desired height.
► Comb attachment [ ]
Trimming height (estimate):
1 mm to 10 mm
Indicator 1 2 3 4 5
Trimming height (mm)
(estimate)
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
Indicator 6 7 8 9 10
Trimming height (mm)
(estimate)
6 6.5 7 7.5 8 8.5 9 9.5 10
► Comb attachment [ ]
ER-GC71
Trimming height (estimate):
11 mm to 20 mm
Indicator 11 12 13 14 15
Trimming height (mm)
(estimate)
11
11.5
12
12.5
13
13.5
14
14.5
15
15.5
Indicator
16
17 18 19 20
Trimming height (mm)
(estimate)
16
16.5
17
17.5
18
18.5
19
19.5
20
Notes
• Actual hair length will be a little longer than the height you set.
• Setting of 10.5 mm is unavailable.
• It can also be used without the comb attachment.
(Trimming height: approx. 0.5 mm)
ER-GC71_51_EU.indb 11 2016/01/28 17:44:57
To Next Page
Loading...
