Panasonic ER-GK20 - Blade Lubrication

18
English
Lubrication
Apply the oil to the blade before and after each use.
1. Remove the blade.
(See page 19)
2. Apply a drop of the oil to
each indicated point.
3. Attach the blade to the
main body, turn on the
power and allow to run for
approximately 5 seconds.
Replacement part
Replacement part is available at your dealer or Service
Center.
Replacement part for
ER-GK20
Blade WER9500
PB019077 - ER-GK20 ������_(01EN)_05-12-20.indd 18 2020/5/12 11:06:12