Panasonic ER-GK20 - Battery Installation Guide

9
English
Installing the battery
• Make sure that the main body is turned off.
1. Remove the battery cover.
Turn the notch on the
battery cover in the
direction of the arrow
until the battery cover is
removed.
2. Check the polarity
(+ and -) and install the
battery.
Thoroughly wipe the main body to prevent
water droplets from getting inside when
installing the battery.
3. Attach the battery cover.
(1) Align the notch on the
battery cover with the
“ ” mark and insert the
battery cover.
(2) Rotate the battery
cover until the notch is
aligned with the “ ” mark on the main
body.
Notes
• You can use the appliance for approximately
3 months with one Panasonic LR6 (AA
alkaline battery). (When used for approx.
5 minutes at one time, once a week in a room
temperature of 20 °C.)
• Be sure to use LR6 (AA alkaline battery).
Notch
Notch
PB019077 - ER-GK20 ������_(01EN)_05-12-20.indd 9 2020/5/12 11:06:06