Panasonic ER-GN70 - Troubleshooting; Specifications

17
English
Troubleshooting
Problem Action
The cutting
performance has
reduced.
Replace the blade.
(See pages 14~15)
Replace the alkaline batteries.
(See page 9)
Clean the inner blade.
(See pages 11~13)
There is an odd odour.
Blade does not move/
rotate smoothly.
The suction power is
low.
Clean the trimmings box.
(See pages 11~13)
Close the water inlet.
(See pages 10 and 14)
The appliance is not
turned on.
Place the alkaline batteries
correctly. (See page 9)
Replace the alkaline batteries.
(See page 9)
If the problems still cannot be solved, contact the store
where you purchased the appliance or a service center
authorized by Panasonic for repair.
Specications
Power supply Dry-cell battery
Battery type
Two LR03 (AAA Alkaline
Batteries) (Sold separately)
This product is intended for household use only.
PB021091 - ER-GN70 香港向说明书_(01EN)_11-12-21.indd 17 2021/11/12 15:54:09