7
Intended use
• This clipper is designed for professional use to trim hair. It can be
operated on rechargeable battery.
• Before and after each use, apply oil at the marked places. (See
page 10.)
Failure to apply the oil may cause the following problems.
- The clipper has become blunt.
- Shorter operating time.
- Louder sound.
• Do not use thinner, benzine, alcohol or other chemicals.
Doing so
may cause failure, cracking or discoloration of the main body.
Clean the
main body
only with a soft cloth slightly dampened with
tap water or soapy tap water.
• You should not allow permanent wave lotion, hair dyeing or hair
spray to come into contact with the main body or the blades.
Doing so may result in cracking or corrosion.
• Before using an attachment, check that it has been installed
correctly. Failure to do so may cause hair to be cut too short.
• The following symbol indicates that a specific detachable power
supply unit is required for connecting the electrical appliance to
the supply mains. The type reference of power supply unit is
marked near the symbol.
Parts identification
A Main body
1 Power switch [ / ]
2
Charge indicator lamp ( )
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C
3 mm comb attachment
D
6 mm comb attachment
E AC adaptor (RE9-83)
8 Charging plug
9 Comb attachment shelves
: Cord
; Power plug
Accessories
F Cleaning brush
G Oil
ER-GP21_CIS.indb 7 2015/12/02 18:01:25
To Next Page
Loading...
