Panasonic ES-LS6A - Cleaning the Shaver

16
• The power switch is locked when the switch lock lamp
(
) blinks for 5 seconds and the shaver does not
operate even though the power switch is pressed.
Using the trimmer
1. Slide the trimmer handle up to
the “
” position so that the
trimmer stands upright.
2. Press
and use.
Press and hold the top knob ( a )
and slide the trimmer handle
down to lower the trimmer.

Tips for better usage
Apply the trimmer edge perpendicular to skin gently
and move downward slowly.
Trimming sideburns Pre‑shave of long beards
Switching the shaver head
You can change the pivot action.
“
”
The shaver head is moved to
prevent missed spots.
“ ”
You can lock the shaver head.
Cleaning the shaver
We recommend cleaning the shaver after each use.
Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1


outer foil [A2]�
2
Press for more than
2 seconds to activate the
sonic vibration cleaning
mode�
• Splashing of foam is
suppressed.
ES-LS6A_EU.indb 16 2021/12/07 20:44:02