14
English
• The shaver can be used for approximately 2 weeks
with a full charge.
(Based on one 3‑minute dry‑shave usage per day in
an ambient temperature range of 20 °C – 30 °C
[68 °F – 86 °F].)
The number of usable days varies depending on the
following conditions.
‑ Beard thickness
‑ Pressure applied to the skin
‑
Usage frequency of the sonic vibration cleaning mode
• If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.
Charging without the self-cleaning recharger
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
into the shaver�
2
Plug the adaptor into a
household outlet�
3
Disconnect the adaptor
after charging is completed�
1
2
Note
You cannot operate the shaver while charging.
Preparing the cleaning liquid
Cleaning can start right after the usage by preparing in
advance.
(See page 17.)
• Remove the AC adaptor from the self‑cleaning recharger.
1
Press the cleaning
liquid unit removal
button (
1
) and
remove the cleaning
liquid unit (
2
) on a
hard, at surface.
• When the self‑cleaning recharger is lifted, or on
the soft surface such as carpets, the lock release
leverwillnottintherechargerproperly.Inthat
case, the cleaning liquid unit cannot be removed.
2
Pour tap water (1)
and detergent (2)
into the cleaning
liquid unit�
• Be careful not to let the
water rise above the
maximum water line (
a
).
• Pour the entire packet
of detergent.
To Next Page
Loading...
