13
English
Cleaning with the brush
Remove the outer foil section and the inner blades.
(See this page.)
► Cleaning with the long brush
Clean the outer foil section,
system outer foil, the shaver body
and the trimmer using the long
brush.
► Cleaning with the short brush
• Clean the inner blades using the short
brush by moving it in direction as
illustrated.
• Do not move the short brush
perpendicularly against the blades as
it will damage the inner blades and
affect their sharpness.
Replacing the system outer foil and the inner blades
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark ( ) to the front,
securely attach the outer foil section to the shaver
until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release buttons and
pull down the system outer foil.
2. Align the foil frame mark ( ) and the system
outer foil mark ( ) and securely attach
together until it clicks.
• Do not press the system outer foil release
buttons with excessive force.
Doing so may bend the system outer foil, preventing complete
attachment to the foil frame.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.
►Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑LV5B
System outer foil and inner
blades
ES9034
System outer foil ES9175
Inner blades ES9170
To Next Page
Loading...
