15
English
Problem Action
Shaver does not operate
even after charging.
Use the appliance in an ambient
temperature approximately 5 °C
or higher.
The battery has reached the end
of its life. In this case, the shaver
will not operate when the power is
turned on with the AC adaptor
connected.
The driving sound
changes while shaving.
The shaving sensor is operating.
The sound changes depending on
the beard thickness.
Makes a loud sound.
Apply oil.
The blades will not move
smoothly when there is no oil on
the blades, requiring more power.
The shaver makes a high‑pitched
sound due to the linear motor
drive. This does not indicate a
problem.
Confirm that the blades are
properly attached.
Clean the system outer foil with
the brush.
The odor is getting
stronger.
This can be improved by cleaning
every time after shaving.
Shavings fly out in all
directions.
This can be improved by cleaning
every time after shaving.
Clean the inner blades with the
brush when shavings are
adhering to the inner blades.
Problem Action
System outer foil gets hot.
Apply oil.
Replace the system outer foil if it
is damaged or deformed.
(See page 13.)
You do not get as close a
shave as before.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Apply oil.
To Next Page
Loading...
