18
the inner blades
system outer foil once every year
inner blades once every two years
Removing the outer foil section
Press the foil frame release buttons [A5]
and lift the outer foil section [A]
upwards.
Attaching the outer foil section
After turning the foil frame mark (
) to the
front, securely attach the outer foil section
[A] to the shaver until it clicks.
1. Press the system outer foil release
buttons [A] and pull down the
system outer foil [A2].
• Do not press the system outer foil
release buttons with excessive force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
2.
Align the foil frame mark ( ) and the system outer foil
mark (
) and securely attach together until it clicks.
Replacing the inner blades
1. Remove the inner blades [A] one at a
time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.
FAQ
Question Answer
Will the battery
deteriorate if not used
for an extended
period of time?
The battery will deteriorate if
not used for over 6 months,
so make sure to perform a
full charge at least once
every 6 months.
Can I charge the
shaver after every
use?
The battery used is a
lithium‑ion, so charging after
every use will have no effect
on battery life.
Why should the
adaptor be
disconnected after
charge?
Charging the battery for more
than 1 hour will not affect
battery performance, but
disconnect the adaptor for
safety and to save energy.
What is the constituent
of the dedicated oil?
Constituent of the oil is
ES-LV6U_EU.indb 18 2021/12/07 21:15:28
To Next Page
Loading...
