Panasonic ES-PV3A - Page 20

20
English
Problem Action
The shaving sensor
responds even
though the shaver is
not in contact with
the skin.
Clean the beard trimmings
from the shaver.
Clean the system outer foil
with the brush. (See
page 17.)
When the shaver is extremely
dirty, remove the foil frame
and wash with water.
(See page 16.)
Replace the system outer
foil and/or inner blades.
Foam cannot be
made in shaving
foam mode.
Making foam may be di󰀩cult
depending on the type of
facial cleansers etc., so
adjust the amount of water
or facial cleanser.
Foam made in
shaving foam mode
contains shavings.
Before making foam, cleanly
rinse o󰀨 any shavings. (See
page 16.)
Problem Action
Operating time is
short even after a
full charge.
When the number of
operations per charge starts
to decrease, the battery is
nearing the end of its life.
Apply oil.
Clean the shaver.
The usable number of days
might be lower depending
on how the shaver is used
(for example, when used for
wet shaving).
Shaver does not
operate even after
charging.
The shaver will not operate
while it is connected to the
household outlet.
Use the specied USB power
adaptor and USB cable.
Use the appliance in an
ambient temperature
approximately 5 °C (41 °F)
or higher.
The battery has reached the
end of its life.
The driving sound
changes while
shaving.
The shaving sensor is
operating. The sound
changes depending on the
beard thickness.