12
English
Cleaning with the brush
Clean the system outer foil
[
B
b
], the shaver body and
the trimmer [
D
j
] using the
long brush.
Clean the inner blades [
C
]
using the short brush by
moving it in direction (A).
• Do not move the short brush
in direction (B) as it will
damage the inner blades [
C
]
and affect their sharpness.
• Do not use the short brush to
clean the outer foils.
(A)
(B)
Replacing the system outer foil and the inner blades
system outer foil
once every year
inner blades once every two years
Replacement parts
Replacement parts are available at your dealer or Service
Center.
Replacement parts for
ES-RT53/ES-RT33
System outer foil WES9087
Inner blades WES9068
Cleaning
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some water to the outer foil.
3. Turn the shaver on.
3
4. Turn the shaver off after 10-20 seconds.
5.Remove the outer foil section [
B
].
5
6. Clean the shaver, the outer foil
section, and the trimmer with running
water.
7. Wipe off any drops of water with a dry
cloth.
8. Dry the outer foil section [
B
] and the
shaver completely.
9. Attach the outer foil section [
B
] to the
shaver.
ES-RT53 33_HK.indb 12 17/5/3 下午3:05
To Next Page
Loading...
