4
English
Using the shaver
Shave
1
1
Depress the switch
lock button and slide
the OFF/ON switch
upwards.
2
2
Hold the shaver as
illustrated above
and shave.
Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver
back and forth in the direction of your beard. You may gently
increase the amount of pressure as your skin becomes
accustomed to this shaver. Applying excessive pressure does
not provide a closer shave.
•
Using the trimmer
Slide the trimmer handle up. Place at
a right angle to your skin and move
downwards to trim your sideburns.
Cleaning
Clean
1. Disconnect the power cord
from the shaver.
2. Apply some hand soap to the
outer foil.
3. Turn the shaver on and then
pour some water over the
outer foil.
4. Turn the shaver off after 10‑20
seconds.
5. Remove the foil frame and
clean it with running water.
6. Wipe off any drops of water
with a dry cloth.
7. Remove the system outer foil
and the foil frame to allow
them to dry completely.
To Next Page
Loading...
