Charging with the self-cleaning
recharger
Charge
Thoroughly wipe off any drops of water on or around the recharger
so that it is dry before charging it.
1
1
Insert the appliance plug into self-cleaning
recharger.
2
2
Plug in the adaptor.
3
3
Remove the protective cap and then attach the
shaver.
Turn the shaver off before attaching.
Check that the outer foil is not deformed or damaged when you
are attaching the shaver.
The indicators on the LCD panel glow and charging starts.
Charging is completed when the indicators on the LCD panel
blink.
(Max. 1 hour later)
You can keep the shaver attached to the recharger, or connected
to the adaptor, when not using it to maintain full battery capacity.
You cannot overcharge the shaver.
If the shape of the plug does not fit the power outlet, use an
attachment plug adaptor of the proper configuration.
•
•
•
•
•
•
Charging without the self-cleaning recharger
You can also charge without the recharger.
1. Inser
t the appliance plug into the shaver.
2. Plug in the adaptor into a household outlet.
To Next Page
Loading...
