11
English
4 Adjust in order of “month”, “day”,
“hour”, and “minutes”, repeating steps
2 and 3.
The clock is stopped while the date or
time is flashing.
•
“Month” “Day” “Hour” “Minute”
5 Press the Off/On Start button to turn
off the unit.
Note) During the setting if the Off/On Start button is pressed, or if no
button is pressed for 5 minutes, the settings made up to that
point will be used.
* Setting range for years is from 2010 to 2050.
Use the tip of a ballpoint pen
etc. to press the Set and Adjust
buttons.
Setting the Time and Date
(cont.)
To Next Page
Loading...
