Why is my Panasonic EW3004 giving high SYS or DIA readings?
High SYS or DIA readings on your Panasonic Blood Pressure Monitor can occur if the pressure cuff is positioned too low or not wrapped properly around the wrist, or if the person is moving or talking during measurement. Please consult the manual for correct positioning.
Why is my Panasonic Blood Pressure Monitor giving low SYS or DIA readings?
Low SYS or DIA readings on your Panasonic Blood Pressure Monitor can occur if the pressure cuff is positioned too high, or if the person is moving or talking during measurement. Please consult the manual for correct positioning.
What to do if my Panasonic EW3004 readings are different from those taken by a doctor?
If your Panasonic Blood Pressure Monitor measurements differ from those taken by a doctor, it may be due to tension during the professional measurement. Relax for ten minutes before taking the measurement again.
Why is blood pressure abnormally high or low on my Panasonic Blood Pressure Monitor?
Inconsistent posture during measurements can cause abnormally high or low blood pressure readings on your Panasonic Blood Pressure Monitor. Please consult the manual for correct posture.
Guidelines for correct posture and device placement for accurate readings.
Explanation of error codes, their causes, and solutions.
Identifies common display errors and provides solutions.
General| Brand | Panasonic |
|---|---|
| Model | EW3004 |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page