Why is my Panasonic EW3003 wrist reading different from my upper arm reading?
For individuals with certain circulation issues, substantial differences can occur between blood pressure readings taken at the upper arm versus the wrist.
Why does my Panasonic Blood Pressure Monitor reading differ from my doctor's?
Blood pressure readings can vary due to slight changes in your mental state, such as your reaction to being measured by a doctor. To check this, bring your Panasonic Blood Pressure Monitor to your doctor's office and directly compare the readings. Also, relax for at least 5 minutes before taking another measurement.
Why is my Panasonic EW3003 showing a high reading?
A high reading on your Panasonic Blood Pressure Monitor may occur if the hand with the cuff was held too low and not at heart level, the cuff wasn't attached properly, or you moved your hand or body, or spoke during the measurement.
Why is my Panasonic EW3003 Blood Pressure Monitor showing a low reading?
A low reading on your Panasonic Blood Pressure Monitor may be due to the hand with the cuff being held too high and not at heart level, or if you moved your hand or body or spoke during the measurement.
Why does my Panasonic EW3003 Blood Pressure Monitor make different sounds during inflation?
Changes in operating sounds and pressurization speeds are normal. These variations occur because measurements are taken as the cuff inflates on your Panasonic Blood Pressure Monitor.
Ensure the wrist cuff is at heart level for accurate blood pressure readings.
Step-by-step guide for seated blood pressure measurement.
General| Brand | Panasonic |
|---|---|
| Model | EW3003 |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page