28
English
(After approx.
2 seconds)
(After approx.
2 seconds)
(After approx.
2 seconds)
(After approx.
2 seconds)
(Data
number)
(Year)
(Date)
(Time)
2. Press the Memory/Recall button again to
display the most recent reading.
Each time you press the Memory/Recall
button another set of readings will be
displayed, starting with the next most recent
readings.
The memory number, measurement year,
date, and time are alternately displayed in
approximately 2 seconds.
Applicable part of the graph will flash.
•
•
•
3. Press the Off/On Start button to turn off the
device.
The device will turn off automatically after
30 seconds if you forget to turn it off.
Deleting all data stored in the memory
(1) Call up the data of the user to delete.
(2) Press the Memory/Recall button again and hold it down for
more than three seconds to delete all data.
* It is not possible to delete individual readings.
(3) When all data has been deleted,
will be displayed.
To Next Page
Loading...
