Please contact your local authority for further details of your nearest designated
collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation.
For Business Users in the European Union
If you wish to discard electrical and electronic equipment, please contact your
dealer or supplier for further information.
Information on Disposal in Other Countries Outside the Euro-
pean Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer
and ask for the correct method of disposal.
III
. MAINTENANCE
Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, ben-
zine, or other volatile solvents for cleaning.
IV
. ACCESSORIES
Use only bits suitable for size of drill’s chuck.
V
. SPECIFICATIONS
MAIN UNIT
Model EY7410
Capacity
Screw driving
Machine screw M2.5 - M5
Wood screw ø 3.8 x 38 mm (5/32
"
x 1-29/64
"
)
Drilling For metal ø 5 mm (13/64
"
) spc t = 1.6 mm
Motor 3.6 V DC
No load speed
LOW: 200 rpm
HIGH: 600 rpm
Maximum torque
LOW: 4.4 N·m (45 k
gf-cm, 39 in-lbs)
HIGH: 1.5 N·m (15 kgf-cm, 13 in-lbs)
Maximum clutch torque 3.0 N·m (30 kgf-cm. 26 in-lbs)
Overall length 276 mm (10-55/64
"
)
Weight (with battery pack) 0.5 kg (1.1 lbs)
To Next Page
Loading...
