EN
Indicator Battery status
illuminated
2 lamps
illuminated
One lamp
illuminated
low.
Need to be
Empty
Need to be
-
diately
condition of battery or ambient tempera-
ture.
battery pack.
Bit-locking Function
tool can be used as a manual screw-
in•lbs).
There will be a little play in the chuck,
but this is not a malfunction.
screws that require more torque than
(position
-
Changing the Belt Hook Location Side
[Fig.8]
The belt hook can be attached to either
side of the unit.
(2) Draw out the hook.
securely fastened.
WARNING!
• Be sure to attach the belt hook securely
fastened. When the belt hook is not
hook may disconnect and the main unit
may fall.
This may result in an accident or injury.
•
•
and securely onto a waist belt or other
not slip off the belt. This may result in
an accident or injury.
• When the main unit is held by the belt
and the main unit may fall.
This may result in an accident or injury.
• When the unit is hooked onto the waist
belt by the belt hook, do not attach
object, such as a drill bit, may cause
injury or an accident.
To Next Page
Loading...
