EN
Battery Tool Use and Care
Ensure the switch is in the off
position before inserting battery
pack.
-
dents.
2) Recharge only with the charger
specied by the manufacturer.
of battery pack may create a risk of
pack.
Use power tools only with speci-
cally designated battery packs.
Use of any other battery packs may
When battery pack is not in use,
keep it away from other metal
objects like paper clips, coins,
keys, nails, screws, or other small
metal objects that can make a
connection from one terminal to
another.
Under abusive conditions, liquid
may be ejected from battery; avoid
contact. If contact accidentally
occurs, ush with water. If liquid
contacts eyes, additionally seek
medical help.
Liquid ejected from the battery may
cause irritation or burns.
Service
Have your power tool serviced by a
qualied repair person using only
identical replacement parts.
This will ensure that the safety of
power tool is maintained.
III. SPECIFIC SAFETY
RULES
2) Use auxiliary handles supplied with
the tool. Loss of control can cause
personal injury.
Hold power tools by insulated
gripping surfaces when performing
an operation where the cutting tool
may contact hidden wiring.
and shock the operator.
outlet.
-
bits.
center position (switch lock).
control mode) so that the motor stops.
If this happens, release the speed
normal operation.
chuck.
the motor.
dust.
period.
To Next Page
Loading...
