To Next PageTo Next Page
Need help?Do you have a question about the Panasonic EY7880 and is the answer not in the manual?
General| Brand | Panasonic |
|---|---|
| Model | EY7880 |
| Category | Rotary Hammer |
| Language | English |
Use the provided auxiliary handle for better control and to prevent injury.
The tool operates without being plugged in, so it's always ready.
Avoid contact with live wires when cutting; exposed metal can become live.
If bit jams, switch off immediately to prevent overload; use reverse to loosen.
Do not operate Forward/Reverse lever when the main switch is on to prevent battery discharge.
Use only a dry, soft cloth for cleaning; avoid solvents.
Set Forward/Reverse lever to center position for switch lock when storing or carrying.
Avoid holding trigger halfway to prevent motor stopping due to protection circuit.
Be careful not to get dust inside the chuck.
Do not touch rotating parts to avoid injury.
Avoid continuous use to prevent motor overheating; take breaks.
Do not drop the tool to prevent damage or injury.
Wear ear protection due to noise exposure which can cause hearing loss.
Do not place tool where chuck cover is depressed to avoid bit falling.
Use only Panasonic battery packs designed for the tool.
Do not dispose in fire, expose to heat, dismantle, or short terminals.
Do not charge in high temperatures; use only dedicated charger.
Reattach pack cover after removal to prevent short circuits.
Replace deteriorated battery packs to prevent heat or rupture.
Instructions for mounting and dismounting the bit chuck.
Step-by-step guide for installing and removing the battery pack safely.
Explains momentary lag before rotation starts when pulling the trigger.
How to use the Forward/Reverse lever and set the lock.
How to use the variable speed trigger for slow rotation.
How to position and tighten the support handle securely.
Explains four modes for drilling and hammering based on lever combinations.
How to adjust the depth gauge for drilling depth.
Cautions for firmly installing the strap and checking its condition to prevent injury.
Indicates battery protection feature activation or low battery.
Indicates motor or battery overheating has halted operation.
Tips for storing, charging, and handling Li-ion battery packs for longevity.
How to identify when a battery pack needs replacement due to reduced operation time.
Information on proper disposal and recycling of used batteries.
How to use the built-in LED light for temporary illumination.
Cautions for using the charger, including voltage, temperature limits, and cooling.
Precautions to prevent fire or damage to the charger, like covering vents and unplugging.
Safety warnings specific to using the chisel attachment, including heat and continuous use.
Warnings about drill bit size and material compatibility for the dust collection cup.
Instructions for cleaning the unit and handling water exposure to the tool or battery.
General caution to use accessories only for their stated purpose to prevent injury.
Defines what causes are excluded from the warranty, like long-term usage damage.
