To Next PageTo Next Page
Need help?Do you have a question about the Panasonic EYFNA1P and is the answer not in the manual?
Keep work area clean, well lit, avoid explosives, keep bystanders away.
Match plugs, avoid body contact with grounded surfaces, keep away from rain/wet conditions.
Stay alert, use safety equipment, avoid accidental starting, maintain footing and balance.
Use correct tool, do not use if switch fails, disconnect power before adjustments/storage.
Ensure switch off before battery insertion, recharge with specified charger, use designated packs only.
Overview of control panel functions like torque control and battery indication.
How to enter and use the tool's configuration mode for settings.
How to select and set the appropriate torque clutch for the work being performed.
How to set the snug point detection level for accurate tightening.
Displays error E1, requires re-initialization with remote control.
Displays error E2, requires cooling battery pack before use.
Displays error E3, requires cooling tool before use.
Displays error E4, requires cleaning contacts between battery and tool.
Displays error E5, requires firm insertion of battery pack.
Displays error E7, requires replacement of battery pack.
Displays error E9, requires stopping tool immediately.
Displays error EA, requires exchange to applicable battery pack.
Keep work area clean, well lit, avoid explosives, keep bystanders away.
Match plugs, avoid body contact with grounded surfaces, keep away from rain/wet conditions.
Stay alert, use safety equipment, avoid accidental starting, maintain footing and balance.
Use correct tool, do not use if switch fails, disconnect power before adjustments/storage.
Ensure switch off before battery insertion, recharge with specified charger, use designated packs only.
Overview of control panel functions like torque control and battery indication.
How to enter and use the tool's configuration mode for settings.
How to select and set the appropriate torque clutch for the work being performed.
How to set the snug point detection level for accurate tightening.
Displays error E1, requires re-initialization with remote control.
Displays error E2, requires cooling battery pack before use.
Displays error E3, requires cooling tool before use.
Displays error E4, requires cleaning contacts between battery and tool.
Displays error E5, requires firm insertion of battery pack.
Displays error E7, requires replacement of battery pack.
Displays error E9, requires stopping tool immediately.
Displays error EA, requires exchange to applicable battery pack.
General| Voltage | 18V |
|---|---|
| Battery Type | Lithium-Ion |
| No Load Speed | 0-2, 500 RPM |
| Length | 143 mm |
| Weight | 1.6 kg |
