Panasonic F10 MARK II - Page 43

FADE IN/OUT OPERATION
When the movie or TV program is seen, the picture gradually
appears at the beginning of the scene (FADE IN effect) and
gradually disappears at the end of the scene (FADE OUT effect).
When the FADE IN/OUT effect is desired, press the VTR
Start/Pause Button (55) on the grip shoulder or on the camera
remote controller after depressing the Fade-in/out Switch (43).
The FADE IN/OUT effect will be accomplish once. If another
FADE IN/OUT effect is desired, the Fade-in/out switch should
be pressed again.
This prevents the FADE IN/OUT performance at undesired
portion by misoperation.
The audio sound FADE IN/OUT effect is simultaneously per-
formed with the picture fade in/out.
White Fade/Black Fade
When operating the Fade-in/out Button (43), this function offers
an additional feature (57).
In case that the WHITE mode is selected, the fading-in or fading-
out picture ends to white scene. And if the BLACK mode is
selected, the fading-in or fading-out picture ends to black scene.
FADE IN Effect
1. Press the Fade-in/out Switch (43) while VTR is in Record/
Pause mode.
The letter F is displayed in the viewfinder.
2. Press the VTR Start/Pause Button (55) for VTR recording.
3. The picture in the viewfinder disappears once, then the
picture gradually appears again (fade in).
The audio sound is also simultaneously performed with the
picture fade in.
When the picture in the viewfinder disappears, the blinking
REC is displayed and the VTR starts to record.
The letter F disappears when the fade in effect is com-
pleted.
997
Picture
in EVF
Output
Picture
of Camera
Press the
Fade-in/out
Button.
Press VTR
start /pause
Button.
Fade in starts.
VTR recording is
Started.
Fade in completed.